Vol 5 No 5 (2013): Civil and transport engineering, aviation technologies / Statyba, transportas, aviacinės technologijos
Published: 2013-12-19
Article
Experimental study on the flexural and shear analysis of concrete beams rein forced with glass fiber -reinforced (GFRP) bars
Abstract 514 | PDF Downloads 800 | DOI https://doi.org/10.3846/mla.2013.73
Page 467-473
The influence of the prestress of reinforced steel on the behaviour of the flexural elements of reinforced concrete
Abstract 505 | PDF Downloads 892 | DOI https://doi.org/10.3846/mla.2013.74
Page 474-480
Analysis of the properties of hydrotechnical concrete employed in the marine environment
Abstract 524 | PDF Downloads 458 | DOI https://doi.org/10.3846/mla.2013.75
Page 481-486
Determining the residual strength of sfrc flexural members
Abstract 493 | PDF Downloads 340 | DOI https://doi.org/10.3846/mla.2013.76
Page 487-491
Analysis of building information modelling using IFC data exchange
Abstract 558 | PDF Downloads 537 | DOI https://doi.org/10.3846/mla.2013.77
Page 492-497
Creation and app lication of a generative algorithm for designing rod gap steel structures
Abstract 486 | PDF Downloads 429 | DOI https://doi.org/10.3846/mla.2013.78
Page 498-505
Optimization of elastic bridge trusses
Abstract 509 | PDF Downloads 405 | DOI https://doi.org/10.3846/mla.2013.79
Page 506-512
Analysis of energy consumption in renovated buildings and simulation of the payback period
Abstract 499 | PDF Downloads 420 | DOI https://doi.org/10.3846/mla.2013.80
Page 513-519
Detailed investigation into the initial contact between soil, porous stone, universal oedometer and simple shear test equipment
Abstract 505 | PDF Downloads 377 | DOI https://doi.org/10.3846/mla.2013.81
Page 520-524
The results of corelation between cone tip resistance, push-in pressure load cells and a compression device
Abstract 475 | PDF Downloads 1022 | DOI https://doi.org/10.3846/mla.2013.82
Page 525-529
Porosity parameters of cement stone containing chemical admixtures of different purpose
Abstract 498 | PDF Downloads 334 | DOI https://doi.org/10.3846/mla.2013.83
Page 530-535
Analysis of the effectiveness of polypropylene fibers usage as sorbents of oil spills resulting from the transport accide
Abstract 493 | PDF Downloads 383 | DOI https://doi.org/10.3846/mla.2013.84
Page 536-540
Research into the reliability of the bridge of a car carrier platform
Abstract 477 | PDF Downloads 405 | DOI https://doi.org/10.3846/mla.2013.85
Page 541-545
Research into the influence of turbocharger system leakage on the parameters of the external work of 1.9 tdi diesel engine
Abstract 511 | PDF Downloads 587 | DOI https://doi.org/10.3846/mla.2013.86
Page 546-551
Heating processes of the axle-boxes of rolling-stock on railway track curves
Abstract 481 | PDF Downloads 425 | DOI https://doi.org/10.3846/mla.2013.87
Page 552-557
Analysis of vehicle lateral stability estimating suspension characteristics on the snowy and dry road
Abstract 493 | PDF Downloads 609 | DOI https://doi.org/10.3846/mla.2013.88
Page 558-564
Investigation into the model of the vehicle system for speed support
Abstract 520 | PDF Downloads 596 | DOI https://doi.org/10.3846/mla.2013.89
Page 565-571
Particularities of automated traffic control systems in the cities of Ukraine
Abstract 482 | PDF Downloads 375 | DOI https://doi.org/10.3846/mla.2013.90
Page 572-577
Application of simulation approach to manpower planning at Ukraine international airlines’ maintenance department
Abstract 521 | PDF Downloads 502 | DOI https://doi.org/10.3846/mla.2013.91
Page 578-582